Onkyo M-282 2-Channel Power Amplifier for Sale - Review & Buy at Cheap Price
List Price : $349.00
Price : Too low to display
Onkyo M-282 2-Channel Power Amplifier Feature | Sale - Review & Buy at Cheap Price
- 100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
- Auto power on/off
- High current, low impedance drive
- Preamp-level input-output loop
- 12volt trigger and input level adjustment
|
|
|
| Brand: |
|
| List Price: |
$349.00 |
| Our Price: |
Too low to display |
| Total Price: |
Too low to display |
| Usually ships in 24 hours |
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual.
Onkyo M-282 2-Channel Power Amplifier Overview | Sale - Review & Buy at Cheap Price
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual.
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)
If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.
You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.
The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.
Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.
What's in the Box
Power amplifier, an AC power cord, and a user's manual.
Onkyo M-282 2-Channel Power Amplifier Specifications | Sale - Review & Buy at Cheap Price
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)
If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.
You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.
The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.
Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.
What's in the Box
Power amplifier, an AC power cord, and a user's manual.
Onkyo M-282 2-Channel Power Amplifier Specification
- 100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
- Auto power on/off
- High current, low impedance drive
- Preamp-level input-output loop
- 12volt trigger and input level adjustment
Our Price :
$349.00
Onkyo M-282 2-Channel Power Amplifier Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual.
*** Product Information and Prices Stored: Mar 01, 2012 14:15:16
Friends Link : for Sale . . . narnia the silver chair 2011 black friday 2011 deals online
